Samsung iDCS 500 Programming Manual page 232

iDCS 500
TECHNICAL MANUAL
AUTO LOG OUT
This ON/OFF option determines if a station will automatically log out of the UCD
group when the RING NEXT timer expires. This setting will be ignored if the RING
NEXT timer is set to 000. This option is set to ON by default.
ALLOUT→ → → → FINAL
This ON/OFF option determines if calls forward to the UCD final destination when all
stations are logged out of the UCD group. If no UCD final destination is assigned
then the call will disconnect. This option is set to ON by default.
AGENT PIN NO.
This ON/OFF option determines if an agent is required to enter an ID number (PIN
code) when logging on to this group. The ID codes are verified in MMC 718.
GBUSY NEXT
This ON/OFF option determines whether calls will follow the overflow timer or go
directly to the NEXT destination when all logged in agents are busy. The option is
OFF by default.
ACTION
1. Press TRSF 607
Display shows
2. Press UP or DOWN to select UCD group or
dial group number
OR
Press LEFT soft key to position cursor under
message number and enter new message
OR
Press RIGHT soft key and advance to next
option using the UP and DOWN keys
to select an option
3. Press RIGHT soft key and advance to next
option Use the UP and DOWN keys to make
a selection.
OR
Make a selection using the dial pad.
MMC: 607
DISPLAY
[530] UCD GROUP
FIRST MSG
[542] SALES
FIRST MSG
[530] UCD GROUP
FIRST MSG
[530] UCD GROUP
UCD RECALL:010 SEC
[530] UCD GROUP
UCD RECALL:010 SEC
PROGRAMMING
PART 2 MARCH 2003
:61
:61
:25
HOME
PAGE
Table of
Contents
HELP