Samsung iDCS 500 Programming Manual page 123

iDCS 500
TECHNICAL MANUAL
MMC: 400
DESCRIPTION:
Assigns several options (listed below) on a per-trunk basis.
OPTIONS
0 1A2 EMULATION
1 TRUNK INC DND
2 TRUNK FORWARD
3 PASS R-CID
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRSF 400
Display show
2. Dial trunk number (e.g. 704)
OR
Press UP or DOWN key to select trunk
OR
CUSTOMER ON/OFF PER TRUNK
When this option is set to ON up to 4 internal
stations can participate in a conversation on
this trunk by pressing the trunk key.
When this option is set to ON a trunk that is
programmed to ring a specific station (a
private line or DIL) will ring at that station if the
station is in DND.
When this option is set to OFF this trunk will
not follow a ringing stations call forwarding.
When this option is set to ON this trunk will
allow the Calling Party number from the
remote node to pass through the main node to
the C.O.
[701] TRK ON/OFF
1A2 EMULATE:OFF
[704] TRK ON/OFF
1A2 EMULATE:OFF
PROGRAMMING
PART 2 SEPTEMBER 2003
DISPLAY
HOME
PAGE
Table of
Contents
HELP