Care & Cleaning; Cleaning The Bowl And Outer Body; Cleaning The Lid - Breville the Fast Slow Pro BPR700 Instruction Booklet

CARE & CLEANING CARE & CLEANING
Before cleaning, ensure the cooker is turned off
by pressing and holding the STOP/CANCEL
button on the control panel. The cooker is
off when the button backlight is no longer
illuminated.
Remove the power plug from the power outlet
and remove the connector end of the power
cord from the cooker base. Allow the cooker
and all accessories to cool completely before
disassembling and cleaning.
CLEANING THE BOWL AND
OUTER BODY
1. The removable cooking bowl can be
washed in the dishwasher. However,
to maintain the ceramic coating, it is
recommended to wash the cooking bowl
in warm soapy water using a mild
household detergent. Rinse with clean
water and dry thoroughly.
2. Wipe the moat and outer body with a
soft, damp sponge. A non-abrasive liquid
cleanser or mild spray solution may be
used to avoid build-up of stains. Apply
the cleanser to the sponge, not the cooker
surface, before cleaning.
3. Remove condensation drip cup by gently
pulling the bottom away from the body.
Wash in warm soapy water, rinse with clean
water, dry thoroughly and click back into
position.
4. Wipe the LCD screen with a soft damp
cloth. Cleaning with dry cloth or abrasive
cleaners may scratch the surface.
5. Let all surfaces dry thoroughly prior to
inserting the power plug into a power
outlet and turning the cooker on.
WARNING
Do not immerse the body, power cord
or power plug in water or any other
liquid as this may cause electrocution.
24

CLEANING THE LID

1. Remove the pressure release valve from
the lid.
2. Open the lid by turning the lid knob
counter clockwise and lifting lid up and off
the appliance until it is in the hinged open
position. Unscrew and remove the sealing
nut from the centre of the lid and pull the
lid away to remove from the lid arm.
3. Gently pull the silicone lid seal out from
around the wire ring on the underside of
the lid.
4. Wash the sealing nut and pressure release
valve in warm soapy water. Rinse with
clean water and dry thoroughly.
5. Wash the silicone lid seal and the lid on the
top rack of the dishwasher. Alternatively,
wash in warm soapy water, rinse with clean
water and dry thoroughly.
6. After cleaning the lid, regularly inspect and
ensure;
a) Safety locking pin moves up and down
freely. Always remove any oil or food
residue left on this area.
b) Pressure release valve and cover are clean
and free of food or liquid. To clean, twist
and pull the pressure release valve cover
off the lid, wipe with a soapy cloth, rinse
and dry thoroughly. Clip cover back into its
original position.