Table of Contents
Advertisement
OPERATING YOUR BREVILLE PRODUCT
These can be selected using the STEAM
RELEASE button on the control panel
during the set up and steam release cycles.
Once selected, the pressure release valve will
automatically release the steam at the end of
the pressure cooking cycle.
Pressing and holding the steam release button
during or after a cooking cycle will open the
pressure release valve.
CAUTION
Always keep hands and face clear
of the pressure release valve when
pressure cooking as hot steam and
water may be emitted during operation.
KEEP WARM
The KEEP WARM function maintains hot
foods at safe serving temperature (60°C or
above) until you are ready to serve for up to
2 hours.
To use KEEP WARM as a standalone
function, press and hold the keep warm
button on the control panel. The LCD screen
will display 'KEEP WARM' and the timer will
start counting up to a maximum of 2 hours.
Turn the time dial to adjust the KEEP WARM
time.
The KEEP WARM function will automatically
switch on after any SLOW COOK cycle;
however it can be toggled on and off in both
PRESSURE COOK and SLOW COOK using
the KEEP WARM button on the control panel.
12
ALTITUDE ADJUST
Pressure builds and increases when the
temperature inside the cooking vessel exceeds
boiling point. As altitude increases, the
temperature at which water boils decreases as
a result of the drop in air pressure. This creates
very different conditions for cooking when
using a pressure cooker.
In order to maintain consistent cooking results
at various altitudes, the Fast Slow Pro™ has an
Altitude Adjust feature that adjusts the settings
based on the altitude of your current location.
1.
To enter Altitude Adjust mode, press and
hold STOP/CANCEL to activate standby
mode. The button backlight will go out and
the LCD will no longer illuminate.
2.
Once in standby, press and hold both the
KEEP WARM and STEAM RELEASE
buttons for 2 seconds.
3.
Turn the TIME dial to enter the altitude
of your current location. Altitude can
be adjusted from 250m to 1,999m. The
pressure cooker should not be used at
altitudes above 2,000m.
NOTE
Exact altitude can be found at
www.elevationmap.net or by calling
Breville Customer Service Centre.
4.
Press the START/ SELECT dial to confirm.
5.
The cooker's settings have now been
adjusted for your current altitude. To reset
altitude to sea level (factory settings),
switch off at the power outlet and press
and hold START/SELECT while switching
back on at the power outlet.
Hide quick links:
Advertisement
Table of Contents
