Operating Your Breville Product; Preparing The Fast Slow Pro - Breville the Fast Slow Pro BPR700 Instruction Booklet

OPERATING YOUR BREVILLE PRODUCT

OPERATING YOUR BREVILLE PRODUCT

PREPARING THE FAST SLOW PRO™

1. Remove and safety discard any packaging
material, promotional labels and tape from
the cooker.
2. Open the lid by turning the lid knob
counter clockwise and lifting lid up and off
the appliance until it is in the hinged open
position. Unscrew and remove the sealing
nut from the centre of the lid and pull the
lid away to remove from the lid arm.
3. Wash the lid, removable cooking bowl and
silicone lid seal in hot, soapy water, rinse
and dry thoroughly. Wipe the inside and
outside of the base with a soft, damp cloth
and dry thoroughly.
4. Attach the clean silicone lid seal securely
around the wire ring on the underside of
the lid. Adjust position if necessary so
that it sits comfortably and is free from
any distortions.
10
5. To reattach the lid, orient the lid so that the
steam release valve housing is to the rear
of the unit, and then align the centre of the
lid with the bolt on the underside of the lid
arm and push into position to expose the
screw thread. Secure the lid by screwing on
the sealing nut so that the red seal touches
the lid surface.
6. Clean and dry the bottom of the removable
cooking bowl and the temperature
sensor, making sure there are no
unwanted materials on the surface. The
removable cooking bowl must sit flat on
the temperature sensor to ensure proper
contact.