Reduce - Breville the Fast Slow Pro BPR700 Instruction Booklet

OPERATING YOUR BREVILLE PRODUCT

REDUCE

The REDUCE setting is ideal for thickening
and intensifying the flavour of sauces, syrups
and stocks.
1. Turn the START/SELECT dial until the
indicator reaches the REDUCE setting.
Press the START/SELECT dial to confirm.
2. The top figure on the LCD screen indicates
the preset temperature for the REDUCE
setting. Turn the TEMPERATURE/
PRESSURE dial to the left to reduce the
temperature or to the right to increase
temperature. Temperature can be adjusted
to one of three preset temperatures; 'LO',
'MED' or 'HI'.
3. The bottom figure on the LCD screen
indicates the preset cooking time for the
REDUCE setting. Turn the TIME dial to
the left to reduce the cooking time or to the
right to increase the cooking time. Time
can be adjusted up to 2 hours.
4. Place liquid to be reduced into the
removable bowl.
NOTE
If reducing cooking sauce from pressure
and slow cooking, remove cooked meat
or vegetables.
Once sauce has reached the correct
consistency and flavour, return meat and
allow to warm through for a few minutes
before serving.
5. Press the START/SELECT dial to
commence cooking. The STOP/CANCEL
button backlight will illuminate red, the
LCD screen will illuminate orange and
indicate 'PREHEATING'.
6. Keep the lid open in the hinged position.
If the lid has not been opened the cooker
alert will sound and 'OPEN LID' will
appear on the LCD screen.
7. Once the cooker has reached temperature,
'PREHEATING' will go out. Place liquid
to be reduced into the removable
cooking bowl.
8. The timer will start counting down. The
time can be adjusted during the reduce
cycle by turning the TIME dial. The cycle
can be paused at any time by pressing
the STOP/CANCEL button. To end the
cycle press and hold STOP/CANCEL for
2 seconds.
9. At the end of the reduce cycle, the cooker
alert will sound, the STOP/CANCEL
button backlight will go out and the LCD
screen will illuminate blue.
10. After 5 minutes of inactivity, standby
mode will be activated. The button
backlight will go out and the LCD will
no longer illuminate.
21