Setting Forward/Reverse Run With Operation Panel - Panasonic VF200 Instruction Manual

4. Operation Method (Basic Operation)
4.6 Setting Forward/Reverse Run with
Operation Panel
There are 2 modes to set forward/reverse run with operation panel as follows.
■ Forward/Reverse Run Button Operation Mode (Parameter P003 is set to "1".)
Press UP (forward run) button or DOWN (reverse run) button on the panel to
select the rotation direction. Then press RUN button to start operation.
* The inverter will not run just by pressing RUN button.
* The "MOP function" cannot be used if frequency setting is made in "Digital
Setting Mode".
■ Rotation Direction Setting Operation Mode (Parameter P003 is set to "0".)
In Operation Status Display Mode, press MODE button twice to enter Rotation
Direction Setting Mode. Press SET button to display the rotation direction data,
change the rotation direction with UP and DOWN buttons, and then press SET
button again to apply the change. (The factory setting is "forward run".)
Finally, press RUN button to start operation.
Current
Display
status
During
O
stop
During
F
forward
run
During
r
reverse
run
Run
command
Operation
panel
External
control
Communication
Rotation
Display
direction
Forward
run
Reverse
run
Rotation
Display
direction
Forward
L
run
Reverse
E
run
C
F
r
Display
F
r