Gvrp And Bridge Extension Commands; Bridge-Ext Gvrp; Table 4-69 Gvrp And Bridge Extension Commands - Samsung iES4028F Management Manual

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange VLAN
information in order to automatically register VLAN members on interfaces across
the network. This section describes how to enable GVRP for individual interfaces
and globally for the switch, as well as how to display default configuration settings
for the Bridge Extension MIB.
Table 4-69
Command

bridge-ext gvrp

show bridge-ext
switchport gvrp
switchport forbidden vlan
show gvrp configuration
show gvrp statistics
clear gvrp statistics
garp timer
show garp timer
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in order to
register VLAN members on ports across the network. This function should be
enabled to permit automatic VLAN registration, and to support VLANs which
extend beyond the local switch.
Example
Console(config)#bridge-ext gvrp
Console(config)#
GVRP and Bridge Extension Commands
Function
Enables GVRP globally for the switch
Shows the global bridge extension configuration
Enables GVRP for an interface
Configures forbidden VLANs for an interface
Displays GVRP configuration for the selected interface NE, PE
Displays GVRP statistics for the selected interface
Clears GVRP statistics for the selected interface
Sets the GARP timer for the selected function
Shows the GARP timer for the selected function
4
VLAN Commands
Mode Page
GC 4-249
PE 4-250
IC 4-250
IC 4-261
4-251
NE, PE 4-251
NE, PE 4-252
IC 4-253
NE, PE 4-254
4-249