3
Configuring the Switch
Switch Power Status
Use the Main Power Status page to display the Power over Ethernet settings for the
switch.
Command Attributes
• Maximum Available Power – The configured power budget for the switch.
• System Operation Status – The PoE power service provided to the switch ports.
• Mainpower Consumption – The amount of power being consumed by PoE
devices connected to the switch.
• Thermal Temperature
• Software Version – The version of software running on the PoE controller
subsystem in the switch.
Web – Click PoE, Power Status.
CLI – This example displays the current power status for the switch.
Console#show power mainpower
Unit 1 Mainpower Status
Maximum Available Power : 180 watts
System Operation Status : on
Mainpower Consumption
Software Version
Console#
10. This parameter is not supported for the current hardware.
3-158
10
– The internal temperature of the switch.
Figure 3-91 Displaying the Global PoE Status
: 0 watts
: Version 0x1B64, Build 0x07
4-218