Configuring Web Authentication For Ports; Figure 3-58 Web Authentication Port Configuration - Samsung iES4028F Management Manual

3
Configuring the Switch

Configuring Web Authentication for Ports

Web authentication is configured on a per-port basis. The following parameters are
associated with each port.
Command Attributes
• Port – Indicates the port being configured
• Status – Configures the web authentication status for the port.
• Authenticated Host Counts – Indicates how many authenticated hosts are
connected to the port.
Web – Click Security, Web Authentication, Port Configuration. Set the status box to
enabled for any port that requires web authentication, and click Apply.
CLI – This example enables web authentication for ethernet port 1/5 and displays a
summary of web authentication parameters.
Console(config)#interface ethernet 1/5
Console(config-if)#web-auth
Console(config-if)#end
Console#show web-auth summary
Global Web-Auth Parameters
System Auth Control
Port Status
---- ------
1/ 1 Disabled
1/ 2 Enabled
1/ 3 Disabled
1/ 4 Disabled
1/ 5 Enabled
1/ 6 Disabled
1/ 7 Disabled
1/ 8 Disabled
1/ 9 Disabled
. .
.
3-100

Figure 3-58 Web Authentication Port Configuration

: Enabled
Authenticated Host Count
------------------------
0
0
0
0
0
0
0
0
0
4-188
4-161
4-164