Show Power Mainpower - Samsung iES4028F Management Manual

4
Command Line Interface
Parameter
Admin
Oper
Power (mWatt)
Power (used)
Priority

show power mainpower

Use this command to display the current power status for the switch.
Command Mode
Privileged Exec
Example
Console#show power mainpower
Unit 1 Mainpower Status
Maximum Available Power : 180 watts
System Operation Status : on
Mainpower Consumption
Software Version
Console#
Parameter
Maximum Available Power The available power budget for the switch (see power mainpower maximum
System Operation Status
Mainpower Consumption
Software Version
4-218
Table 4-59 show power inline status parameters
Description
The power mode set on the port (see power inline on page -215)
The current operating power status (displays on or off)
The maximum power allocated to this port (see power inline maximum
allocation on page -216)
The current power consumption on the port in milliwatts
The port's power priority setting (see power inline priority on page -216)
: 15 watts
: Version 0x01F9, Build 0x04
Table 4-60 show power mainpower parameters
Description
allocation on page -214)
The current operating power status (displays on or off)
The current power consumption on the switch in watts
The version of software running on the PoE controller subsystem in the switch.