General Commands; Table 4-5 General Commands - Samsung iES4028F Management Manual

4
Command Line Interface
Command Group
Multicast Filtering
IP Interface
The access mode shown in the following tables is indicated by these abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
GC (Global Configuration)
IC (Interface Configuration)
LC (Line Configuration)
SG (Server Group)

General Commands

Command Function
enable Activates privileged mode
disable Returns to normal mode from privileged mode
configure Activates global configuration mode
show history Shows the command history buffer
reload Restarts the system
show reload Displays the time remaining until a delayed reset will take place
prompt Customizes the prompt used in PE and NE mode
end Returns to Privileged Exec mode
exit Returns to the previous configuration mode, or exits the CLI
quit Exits a CLI session
help Shows how to use help
? Shows options for command completion (context sensitive)
4-10
Table 4-4 Command Groups
Description
Configures IGMP multicast filtering, query parameters, specifies ports
attached to a multicast router, and enables multicast VLAN registration
Configures IP address for the switch

Table 4-5 General Commands

(Continued)
MST (Multiple Spanning Tree)
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
VC (VLAN Database Configuration)
Page
4-324
4-347
Mode Page
NE 4-11
PE 4-11
PE 4-12
NE, PE 4-12
PE 4-13
PE 4-14
GC 4-14
any 4-15
config.
mode
any 4-15
NE, PE 4-16
any NA
any NA