Casio FX-730P Owner's Manual page 91

4-7 Convenient Peripherals
I. Printing Program Contents
Execute the LIST command after pressing
§El[2]
in the RUN mode. If it is
desired to print out the con ten ts of all program areas from PO to P9, enter LIST
ALL~.
After completing printing, do not forget to press
§El~
to cancel the PRINT
mode.
2. Printing Out Calculation Results
When desiring to print calculation results , specify the PRINT mode by pressing
§)(2)
or by writing "MODE 7" in the program. It will be more convenient to
write "MODE 7" in the program if only certain parts are to be printed.
*When writing in the program, enter
(MJ[QJ[Q]W
instead of pressing the
§El
key.
3. Printing Data in the DAT A BANK
To print the memo data stored in the DATA BANK (See Chapter 7), execute the
LIST# command after pressing
§E][2]
in the RUN mode .
*After printing is finished , cancel the PRINT mode by pressing
§]~
8 1