Mode - Casio FX-730P Owner's Manual

136
CHAPTER 6 Command Reference
MODE
Numeric expression
Function:
Sets the state of the computer.
Parameter:
Numeric expression:
Explanation:
Values below the decimal point are discarded .
4
~numeric
expression< 9
®
1) Sets the angle unit and PRINT mode or releases these modes depending on
the numeric expression used.
2) Settings are as follows .
MODE 4 . . . . . . . . . Sets the angle unit to degrees .
MODES
MODE6
MODE7
MODE8
Sets the angle unit to radians .
Sets the angle unit to grads .
Displays "PRT ON" and sets the PRINT mode.
Releases the PRINT mode .
3) Same setting as by
the~
key. However , the RUN mode and WRT mode
cannot be set using this command. Also , input cannot be performed with the
~
key, but by pressing the
OO[[]~IIJ
keys.
Example:
10 MODE 4
20 A=SIN 30 : PRINT~A= ~; A
30 MODE 5
40 B=COS(n/6l : PRINT~B=~ ; B
50
END
*You can find the "DEG" symbol on the display changes to the " RAD" symbol
during program execution.