Specifying The Memo In Mode - Casio FX-730P Owner's Manual

178
7-1 Specifying the MEMO IN Mode
With its DAT A BANK function, this computer can be used as an "electronic
memo pad" in which data (memo data) can be conveniently written and from
which the necessary data can be retrieved by simple ke( operations.
In order to utilize the DATA BANK function, it will first be necessary to input
and store data. Specify the MEMO IN mode to input data to the DAT A BANK.
Pressing
~~
will specify the MEMO IN mode and the display will appear as
shown below.
MEMO IN mode display
Record number
BUZZER
DEG
Cursor
The symbol "
~~"
at the upper center of the display shows that the MEMO
IN mode is currently specified. The number at the upper right is the record
number which indicates the memo data line.
The above display shows that the cursor is blinking at the left end with nothing
stored in the DATA BANK as yet and the computer is in the key-input waiting
state for Record 1. If the record number happens to be 5, it will mean that four
lines of memo data have already been stored in the DATA BANK.