Casio FX-730P Owner's Manual page 18

8
CHAPTER 1 General Guide
• Mode Key (
~
)
When specifying a computer mode or an angle unit, use this key in combination
with
GJ,
~-~.
~GJ·
· · · · ·
This turns the key input buzzer sound on and off. When the
buzzer is on, the "BUZZER" symbol lights up on the display.
~~·
···· · The "RUN" symbol is displayed for manual and program calcula-
tions. (RUN mode)
~CTI ·· · · · ·
The "WRT" symbol is displayed for program writing, checking
and editing. (WRT mode)
~~·
· · · · · The "TRACE ON" symbol is displayed for execution of tracing.
(For details, see page 71.)
~~ ·
· · · · · When the "TRACE ON" symbol is displayed, the execution trace
mode is canceled and "TRACE ON" disappears.
~~ ·
· ·· · · The "DEG" symbol is displayed specifying "degrees" as the angle
unit.
~§·
··· ··
The "RAD" symbol is displayed specifying "radians" as the angle
unit.
~(§]· ·· · ··
The "GRA" symbol is displayed specifying "grads" as the angle
unit.
~CZI ·
· · · · · The "PRT ON" symbol is displayed and printer output is possible
when a printer is connected to the computer.
~[§)·
· · · · ·
When "PRT ON" is displayed, the printer output mode is can-
celed and "PRT ON" disappears.
~~ ·· ····The "~8"
symbols light up to indicate that the MEMO IN
mode is specified. This mode permits memo data input to the
DATA BANK. (For details , see Chapter 7.) To cancel this mode,
press
~~ .