Honeywell SDC Operating Instructions Manual page 18

SDC / DHC 43
4.1.2.5.2 Absence Mode (Short-term Program)
ABSENT TIL
01. 1 0
20. 1 0
æ ç è é ê ë ì í
Factory setting
Setting range
4.1.2.5.3 Party Mode (Short-term program)
PARTY TIL
02. 3 0
20. 1 0
æ ç è é ê ë ì í
Factory setting
EN2H-0220 GE51 R1005
rices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytu
By means of this program, the heating can be
temporarily switched off in case of a brief period of
absence. During the period of absence all the heating
circuits are controlled according to the specified reduced
room temperature. At the expiry of the set time, the
heating circuits return automatically to the operating
mode that was active before the absence program.
Short-term programs like Party or Holiday will be skipped
during this mode.
Application Short-term absence within the heating season
P1
P1 (absent up to the next switch-on time)
0.5 hours from the activation...24 hours from the
activation
Display An active absence program appears on the basic display
with the indication of the return time.
This program provides for a one-time intermediate
heating of all the heating circuits up to a specified time
and skips completely or in part a forthcoming or an
already active reduced cycle. At the expiry of the set
time, the heating circuits return automatically to the
operating mode that was active before the party
program.
Short-term programs like Absence or Holiday will be
skipped during this mode.
Application One-time unscheduled extension of the heating or
intermediate heating during reduced mode
P1 after activation (the next switch on time leads back to
automatic mode)
from the time of activation (the next switch on
time leads back to automatic mode)
16
Operation