Honeywell SDC Operating Instructions Manual page 17

Operation
4.1.2.5.1 Holiday Mode (Short-term Program)
HOLIDAY TIL
18. 2 0
æ ç è é ê ë ì í
rices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytu
24. 0 9
Application
Factory setting
Setting range
Display
Setting:
Press the "operating mode" key ¢.
►
Set the flashing operating mode by turning to the
►
desired operating mode.
Confirm the value by pressing the "operating mode"
►
key ¢ or the rotary pushbutton î.
In case of short-term operating modes (Holiday,
►
Absence, Party) set the desired target value by
turning the rotary pushbutton î and confirm the set
value as described above.
Alternatively, the value can be acquired by automatic
►
exit after the set INFO-TIME (see "System
Information).
Return to the basic display by keeping the "operating
►
mode" key ¢ pressed for about 3 s.
By means of this program, the heating and domestic hot
water (DHW) can be switched off with frost protection for
the whole duration of the holiday.
Long absence during the heating season
Current date
Current date...Current date + 250 days
An active holiday program appears on the basic display
with the indication of the return date.
15
SDC / DHC 43
EN2H-0220 GE51 R1005