Table of Contents
Advertisement
Chapter 1 Maintenance
•
Clearing a password
1. Refer to "Getting Started" provided with this server or Chapter 2 (1. Installing Internal Optional Devices)
in "User's Guide" to remove Top Cover.
(Turn off the server, and disconnect the AC power cord from power supply units)
2. Confirm the position of Clear Password Jumper.
3. Change jumper swtich settings.
4. Close Top Cover and press POWER Switch.
5. POST halts with the following error message
ERROR
8007:SETUP Menu Password cleared by Jumper.
Press<F1> to resume, <F2> to Setup
6. Turn off the power and return the jumper switch to its original position by following steps 1 and 2.
7. Close Top Cover.
50
Express5800/R120d-1E, R120d-2E Maintenance Guide
7. Resetting and Clearing the Server
Advertisement
Table of Contents
