NEC R120d-1E N8100-1954F Maintenance Manual page 138

Express5800 series
Hide thumbs Also See for R120d-1E N8100-1954F:
Table of Contents

Advertisement

Chapter 3 Appendix
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C302: Hardware configuration error.
[Description]
Illegal hardware configuration was detected.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C320: Unmatched PSUs.
[Description]
Power supply units 1 and 2 are not the same type.
[Recommended action]
Check type of power supply units.
If it does not solve your problem, check installation status of power supply units.
If it does not solve your problem, remove power supply unit and install it again.
If it does not resolve your problem, unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C321: System power consumption is out-of-range in PSUs
[Description]
System power consumption exceeds the power output capacity limit.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not solve your problem, check installation status of power supply units.
If it does not solve your problem, remove power supply unit and install it again.
If it does not resolve your problem, contact your sales representative.
C322: No information for system power consumption check
[Description]
No information is acquired in checking system power consumption due to an occurrence of error.
[Recommended action]
Restart the server.
If it does not resolve your problem, unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not solve your problem, check installation status of power supply units.
If it does not solve your problem, remove power supply unit and install it again.
If it does not resolve your problem, contact your sales representative.
C501: Intel(R) Node Manager is in Recovery Mode
[Description]
138
Express5800/R120d-1E, R120d-2E Maintenance Guide
1. Error Message

Advertisement

Table of Contents
loading

Table of Contents