Table of Contents
Advertisement
Chapter 3 Appendix
An error was detected on SROM containing the censor data records information.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C112: BMC SEL device failure.
C113: BMC RAM test error.
C114: BMC Fatal hardware error.
[Description]
A BMC ERROR WAS DETECTED.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C11B: BMC Mezzanine card is not found.
[Description]
BMC Mezzanine card is not installed.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C11C: BMC Mezzanine partition is invalid.
[Description]
A format error was detected in BMC Mezzanine card.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C11D: BMC is in Force Mode.
[Description]
Detected that BMC is in Force Mode.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C200: The error occurred during memory configuration check.
[Description]
Acquisition of memory configuration data failed.
136
Express5800/R120d-1E, R120d-2E Maintenance Guide
1. Error Message
Advertisement
Table of Contents
