Table of Contents
Advertisement
Chapter 1 Maintenance
[?]
The system displays the message below and fails to log on:
Windows Product Activation
This copy of Windows must be activated with
Microsoft before you can continue.
You cannot log on until you activate Windows.
To shut down the computer, click [Cancel].
Is the Windows product license authentication procedure completed?
→
In Windows Server 2003, the above message will be displayed if you use the operating system without
executing the license authentication. Select [Yes], and execute the procedure for license authentication.
[?]
The following message appears when logging in the system on Windows Server 2008 R2 or Windows
Server 2008:
Have you finished license authentication for Windows product?
→
The above message will appear if you use Windows Server 2008 R2 or Windows Server 2008 with the
unauthenticated license.
Select [Get Genuine Windows right now] and proceed license authentication.
The above message is an example of request for license authentication. The message displayed on
screen may differ from this depending on the license.
30
Yes (Y)
No (N)
Cancel
Express5800/R120d-1E, R120d-2E Maintenance Guide
5. Troubleshooting
Advertisement
Table of Contents
