Table of Contents
Advertisement
Chapter 3 Appendix
C10C: BMC update firmware corrupted.
[Description]
A BMC error was detected.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C10D: Internal Use Area of BMC FRU corrupted.
[Description]
An error was detected on SROM containing the chassis information.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C10E: BMC SDR Repository empty.
[Description]
An error was detected on SROM containing sensor data record (SDR).
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C10F: IPMB signal lines do not respond.
[Description]
An error was detected on BMC。
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C110: BMC FRU device failure.
[Description]
An error was detected on SROM containing the chassis information.
[Recommended action]
Unplug the power cord of server, wait for 30 seconds, and reboot the server.
If it does not resolve your problem, contact your sales representative.
C111: BMC SDR Repository failure.
[Description]
Express5800/R120d-1E, R120d-2E Maintenance Guide
1. Error Message
135
Advertisement
Table of Contents
