D-Link DES-1228 Reference Manual page 79

Example usage:
To show Syslog host information:
DES-1228/ME:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address
------- ---------------
1 10.1.1.2
2 10.40.2.3
3 10.21.13.1
Total Entries : 3
DES-1228/ME:4#
config log_save_timing
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the time interval as every 30 minutes for saving log files:
DES-1228/ME:4#config log_save_timing time_interval 30
Command: config log_save_timing time_interval 30
Success.
DES-1228/ME:4#
show log_save_timing
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Severity
--------------
All
All
All
Used to configure the method of saving log files to the switch's flash memory.
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]
The config log_save_timing command allows the user to configure the time method
used in saving log files to the switch's flash memory.
time_interval <min 1-65535> − Use this parameter to configure the time interval that will
be implemented for saving log files. The log files will be save every x number of minutes
that are configured here.
on_demand − Users who choose this method will only save log files when they manually
tell the Switch to do so, using the save or save log command.
log_trigger − Users who choose this method will have log files saved to the Switch every
time a log event occurs on the Switch.
Only Administrator-level users can issue this command.
Used to display the method configured for saving log files to the switch's flash memory.
show log_save_timing
The show log_save_timing command allows the user to view the time method
configured for saving log files to the switch's flash memory.
None.
None.
Facility UDP port
-------- --------
Local0 514
Local0 514
Local0 514
74
Status
--------
Disabled
Disabled
Disabled