show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DES-1228/ME:4#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval
DES-1228/ME:4#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DES-1228/ME:4#enable sntp
Command: enable sntp
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the source IP address,
time and poll interval.
None.
None.
: System Clock
: Disabled
: 10.1.1.1
: 10.1.1.2
: 30 sec
To enable SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately configured (see config
sntp). Enabling and configuring SNTP support will override any manually configured
system time settings.
None.
Only Administrator-level users can issue this command. SNTP settings must be configured
for SNTP to function (config sntp).
187