D-Link DES-1228 Reference Manual page 159

Port number
Capability
AdminCrlDir
OpenCrlDir
Port Control
QuietPeriod
TxPeriod
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuthenticate
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show 802.1x auth_state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the 802.1X auth state for Port-based 802.1X:
DES-1228/ME:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port Auth PAE State
------ -----------------
1 ForceAuth
2 ForceAuth
3 ForceAuth
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
: 1
: None
: Both
: Both
: Auto
: 60 sec
: 30 sec
: 30 sec
: 30 sec
: 2 times
: 3600 sec
: Disabled
Used to display the current authentication state of the 802.1X server on the Switch.
show 802.1x auth_state {ports <auth_portlist>}
The show 802.1x auth_state command is used to display the current authentication state
of the 802.1X Port-based or Host-based Network Access Control application on the
Switch.
<auth_portlist> − Specifies a port or range of ports to be viewed.
The following details what is displayed:
Port number − Shows the physical port number on the Switch.
Auth PAE State: Initalize / Disconnected / Connecting / Authenticating / Authenticated /
Held / ForceAuth / ForceUnauth − Shows the current state of the Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initalize / Success / Timeout − Shows the
current state of the Backend Authenticator.
Port Status: Authorized / Unauthorized − Shows the result of the authentication process.
Authorized means that the user was authenticated, and can access the network.
Unauthorized means that the user was not authenticated, and cannot access the network.
None.
-----------------
Backend State
Success
Success
Success
154
Port Status
-----------------
Authorized
Authorized
Authorized