disable igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable IGMP snoop multicast VLAN:
DES-1228/ME:4#disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DES-1228/ME:4#
show igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IGMP snoop multicast VLAN:
DES-1228/ME:4#show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
Muticast Vlan Global State : Enabled
VID
Member Ports
Tagged Member Ports :
Source Ports
Status
Replace Source IP
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to disable the multicast VLAN function.
disable igmp_snooping multicast_vlan
This command controls the multicast VLAN function. The ISM VLAN will take effect when
igmp snooping multicast vlan is enabled. By default, the multicast VLAN is in a disabled
state.
None.
Only Administrator-level users can issue this command.
Used to show the information of multicast VLAN.
show igmp_snooping multicast_vlan {<vlan_name 32>}
The show igmp_snooping multicast_vlan command allows you to show the information
of multicast VLAN.
<vlan_name 32> − The name of the multicast VLAN to be shown.
None.
: 123
VLAN Name: 123
:
:
: Disabled
: None
250