D-Link DES-1228 Reference Manual page 61

config firmware
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure firmware section image 1 as a boot up section:
DES-1228/ME:4# config firmware image_id 1 boot_up
Command: config firmware image_id 1 boot_up
Success.
DES-1228/ME:4#
show firmware information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current firmware information on the Switch:
DES-1228/ME:4#show firmware information
Command: show firmware information
ID Version Size(B)
-- -------- -------
*1 1.00.B04 1687980
2 1.00.B03 1687456
'*' : Boot up firmware
(SSH) : Firmware update through SSH
(WEB) : Firmware update through WEB
(SNMP) : Firmware update through SNMP
(TELNET) : Firmware update through TELNET
(CONSOLE) : Firmware update through CONSOLE
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to configure the firmware section image as a boot up section, or to delete the
firmware section
config firmware image_id <int 1-2> [delete | boot_up]
This command is used to configure the firmware section image. The user may choose to
remove the firmware section or use it as a boot up section.
image_id – Specifies the working section image. The Switch can hold two firmware
versions for the user to select from, which are specified by image ID.
delete – Entering this parameter will delete the specified firmware section image.
boot_up – Entering this parameter will specify the firmware image ID as a boot up section
image.
Only Administrator-level users can issue this command.
Used to display the firmware section information.
show firmware information
This command is used to display the firmware section information.
None.
Only Administrator-level users can issue this command.
Update Time
-------------------
0000/00/00 00:08:08
0000/00/00 17:10:10
From
--------------------
192.168.69.111(WEB)
10.10.27.67(CONSOLE)
56
User
-------------
Anonymous
Anonymous