56
en | System Configuration
1
ACK
Continue in the same way for the Open Collector outputs 2 to 8.
4.7.6
Control all outputs
7
6
ACK
4.8
Resetting To Delivery State
You can use Config Reset to reset the programming of the fire
panel to the default values set when delivered.
Notice!
Resetting the fire panel deletes all of your changes to the
programming. The panel is reset to the default programming,
see Default Settings, page 74.
2014.06 | 7.0 | F.01U.172.980
Press zone key 1.
This takes you to the OC/Relay 1 submenu.
–
Press the ACK key.
RESET
The OC/Relay 1 output is activated.
–
Press the RESET key.
The OC/Relay 1 output is deactivated.
Press zone key 7.
This takes you to the Output Control menu.
Press zone key 6.
This takes you to the All submenu.
–
Press the ACK key.
RESET
All outputs are activated.
–
Press the RESET key.
All outputs are deactivated.
Conventional Fire Panel
Bosch Sicherheitssysteme GmbH