Conventional Fire Panel
3.4
Initial Start-Up
As soon as the fire panel is connected to the power for the first
time, an LED and buzzer test begins. This is completed the first
time a key is pressed.
In the initial start-up, you must make the following basic
settings:
–
–
3.4.1
Setting the Language
To set the language, proceed as follows:
i
ACK
3.4.2
Setting the Time and Date
Set the current time and date. The current time and date are
important for functions such as
–
–
i
ACK
Repeat this procedure to set the correct values for the month,
year and time.
Bosch Sicherheitssysteme GmbH
Set the language
Set the time and date
Use the arrow keys to set the desired language.
Confirm your selection in the menu with the ACK
key.
Event memory and
Automatic switching to night mode.
Use the arrow keys to set the current day.
Confirm your selection in the menu with the ACK
key.
Installation | en
2014.06 | 7.0 | F.01U.172.980
29