Bosch FPC-500-2 Installation Manual page 32

32 en | System Configuration
Exiting operating level 3
Notice!
When you exit operating level 3, the fire panel automatically
switches to night mode.
If you are in operating level 3, proceed as follows.
RESET
ACK
Menu
Operating level 3 of the fire panel offers you the following
setting options:
–
–
–
–
–
–
–
–
Notice!
The structure and description of menus of operating levels 1
and 2 can be found in the operating instructions.
2014.06 | 7.0 | F.01U.172.980
Press the RESET key.
You exit operating level 3 when you are at the top
level of the menu. The configuration is stored and
the inputs and outputs are activated.
– Press the ACK key to exit operating level 3.
RESET
– If you do not want to exit operating level 3,
press the RESET key.
1-System Config
2-Delay Config
3-Zone Config
4-Input Config
5-Output Config
6-View Config
7-Output Control
8-Config Reset
Conventional Fire Panel
Bosch Sicherheitssysteme GmbH