6-26-11. MB-1098 Board
1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the bottom panel. (Refer to Section 2-7-2.)
3. Remove the harnesses and the flexible card wires
connected to the four connectors (CN71, CN72, CN73,
CN81, CN82) on the MB-1098 board.
4. Remove the plug-in boards. (Refer to Section 6-26-1.)
5. Remove the DDE-22 board. (Refer to Section 6-26-4.)
6. Remove the switching regulator.
(Refer to Section 6-25.)
7. Remove the four screws and remove the MB-1098
board.
8. Re-attach the parts in reverse order of the disassem-
bling procedure.
HVR-1500
CN82
CN81
CN73
MB-1098
board
CN71
CN72
MB-1098 board
BVTT3 x 6
6-71