Dvp-42 Board - Sony HDV HVR-1500 Service Manual

5. Stand the unit with the left side down.
6. Remove the harnesses and flexible card wires from the
11 connectors (CN1, CN12, CN13, CN14, CN15,
CN16, CN17, CN18, CN301, CN302, CN303) on the
DR-428BG board.
DR-428BG board
CN18
CN12
CN17
CN16
CN13
CN15
CN14
CN1
7. Remove the six screws securing the DR-428BG board.
8. Re-attach the parts in reverse order of the disassem-
bling procedure.
n
When attaching the parts, align the two positioning
holes on the DR-428BG board with the positioning
pins.
Positioning pins
DR-428BG board
6-68
RP-133 board
CN302
CN303
CN301
Positioning
hole
B2 x 4
Positioning
hole
B2 x 4

6-26-6. DVP-42 Board

1. Remove the rear panel. (Refer to Section 2-7-4.)
2. Remove the SDI assembly. (Refer to Section 6-26-1.)
3. Remove the SDI-94 board. (Refer to Section 6-26-13.)
4. Remove the HPR-20 board. (Refer to Section 6-26-8.)
5. Remove the three screws and remove the DVP-42
board.
6. Re-attach the parts in reverse order of the disassem-
bling procedure.
DVP-42 board
B3 x 5
HVR-1500