Input/Output Signals Of The Connectors - Sony HDV HVR-1500 Service Manual

1-6. Input/Output Signals of the Connectors

INPUT
REF. VIDEO IN (SD/HD) :
VIDEO IN:
SDI IN:
AUDIO IN:
AUDIO I/O (AES/EBU) :
TC IN:
HDV/DV:
OUTPUT
VIDEO OUT:
SDI OUT:
1-4
BNC x 2 (loop-through with 75 Z automatic terminator)
SD composite sync, black burst: 0.286 V p-p (525/60) or 0.3 V p-p (625/
50), 75 Z, negative sync
HD tri-level sync: 0.3 V, 75 Z, negative sync
BNC x 4 (When HVBK-1505 is attached)
Composite
Y/S-Y/CPST and 1 loop-through connector with 75 Z automatic
terminator: 1.0 V p-p, 75 Z, negative sync
Component
Y/S-Y/CPST: 1.0 V p-p, 75 Z, negative sync
R-Y/S-C and B-Y: 0.7 V p-p (75 % color bars for 525/59.94 or 100%
color bars for 625/50) , 75 Z
S-video
Y/S-Y/CPST: 1.0 V p-p, 75 Z, negative sync
R-Y/S-C: 0.286 V p-p (525/59.94) or 0.3 V p-p (625/50), 75 Z (burst
level)
BNC x 1
Serial digital interface format (270 Mbps), SMPTE 259M/ITU-R BT.656
XLR 3-pin x 2, FEMALE (When HVBK-1505 is attached)
*
+4/0/_3 /_6 dBm , high impedance, balanced
*
: For 625/50 only
BNC x 2
Complying with AES-3id-1995
BNC x 1, SMPTE timecode (525/59.94) or EBU timecode (625/50)
0.5 V p-p to 18 V p-p, 3.3 kZ, unbalanced
6-pin IEEE 1394 connector x 1
BNC x 3
Composite
Y/CPST: 1.0 V p-p, 75 Z, negative sync
Component (SD)
Y/CPST: 1.0 V p-p, 75 Z, negative sync
Pr/R-Y/S-C and Pb/B-Y/S-Y: 0.7 V p-p (75% color bars for 525/59.94
or 100% color bars for 625/50),75 Z
Component (HD)
Y: 1.0 V p-p, 75 Z, negative sync
Pr, Pb: 0.7 V p-p, 75 Z
S-video
Pb/B-Y/S-Y: 1.0 V p-p, 75 Z, negative sync
Pr/R-Y/S-C: 0.286 V p-p (525/59.94) or 0.3 V p-p (625/50), 75 Z (burst
level)
Monitor video output
BNC x 1
(SUPER) CPST: 1.0 V p-p, 75 Z, negative sync
BNC x 2
Serial digital interface format (270 Mbps), SMPTE 259M/ITU-R BT.656
HVR-1500