6. PROCESS CHECK
*
This menu is for the factory use only.
7. REF CHECK
*
This menu is for the factory use only.
8. RP DATA INITIALIZE
1. Select the RP DATA INITIALIZE.
2. As "RP DATA INITIALIZE" will be displayed on the screen,
press the SET (YES) key when initializing the adjusted data.
n
After initialization, be sure to perform the following three
adjustments in Section "4-3-6. Electrical Adjust."
1. PLL F0
2. EQ AUTO ADJ
4. REC CURRENT
9. AVP BOARD ADJ
For adjustment of "AVP BOARD ADJ", refer to Section 8-3.
10. LCD ADJ
For adjustment of "LCD ADJ", refer to Section 8-5.
HVR-1500
4-39