Specification - Mitsubishi Electric GOT1000 Series Handbook

1.2 Specification

GT16
General specifications
Item
Operating ambient Display
1
temperature*
Other than display
Storage ambient temperature
Operating ambient humidity
Storage ambient humidity
Conforming
to JIS B 3502
Vibration resistance
and
IEC 61131-2
Impact resistance Conforming to JIS B 3502 and IEC 61131-2 (147m/s
Operating atmosphere
2
Operating altitude*
Installation location
3
Overvoltage category*
4
Contamination level*
Cooling method
Grounding Type D grounding (100
Performance specifications
Item
GT1695M-XTBA
GT1695M-XTBD
Type TFT color LCD (high-brightness, wide viewing angle)
Screen size 15"
Resolution XGA: 1024 768 [dots]
304.1(W) 228.1(H)[mm]
Display size
No. of displayed
16-dot standard font: 64 chars. 48 lines (2-byte)
characters
12-dot standard font: 85 chars. 64 lines (2-byte)
Display
Display colors
*1
2
View angle* Right/left: 75 , Up: 50 , Down: 60
Intensity 450 [cd/m
Intensity adjustment
Life
(operating ambient temperature: 25 C)
Cold-cathode fluorescent tube (replaceable), with backlight OFF detection function.
Backlight
Backlight off time and screen save time can be set.
3
Life*
(Time for display intensity reaches 50% at operating ambient temperature of 25 C)
Type
Key size
Touch
panel
No. of simultaneous touch points Simultaneous touch prohibited*
Life 1,000,000 times or more (operating force 0.98N or less)
Detection distance
Detection range
Human
sensor
Detection delay time
Detection temperature Temperature difference to be 4 C or more between human body and ambient air
Memory C drive
(for saving project data and OS)
*5
Life (No. of writings)
Battery
Backed up data Clock data, maintenance time notification data and system log data
Life Approx. 5 years (operating ambient temperature: 25 C)
Transmission speed: 115200/57600/38400/19200/9600/4800bps,
Connector shape: D-sub 9-pin (male)
RS-232
Application: Communication with connected devices,
connection to personal computer
(project data upload/download, OS installation, FA transparent function)
Transmission speed: 115200/57600/38400/19200/9600/4800bps
RS-422/485
Connector shape: 14-pin (female)
Application: Communication with connected devices
Data transfer system: 100BASE-TX, 1ch
Connector shape: RJ-45 (modular jack)
Ethernet Application: Communication with connected devices, gateway function,
Built-in
connection to personal computer
interface
(project data upload/download, OS installation, MES interface function)
USB (full-speed 12Mbps), host 1ch
Application: Data transfer and storage
USB
USB (full-speed 12Mbps), device 1ch
Application: Connection to personal computer
(project data upload/download, OS installation, FA transparent function)
Compact flash slot, 1ch, Connector shape: TYPE
CF card
Application: Data transfer, data storage, GOT startup
Optional function board 1ch for optional function board installation
Extension unit 2ch for communication unit/optional unit installation
Buzzer output Single tone (tone length adjustable)
Protective construction JEM1030 Front: IP67f*
External dimensions
397(W) 296(H) 61(D)[mm]
(without USB port cover)
Panel cut dimensions 383.5(W) 282.5(H)[mm]
5.0[kg]
Weight (excl. mounting brackets)
Applicable
Screen design software GT Designer2 Version 2.90U or later
software
Simulation software GT Simulator2 Version 2.90U or later
packages

Specification

0 C to 50 C
0 C to 55 C
-20 C to 60 C
10 to 90%RH, no condensation
10 to 90%RH, no condensation
Frequency Acceleration
5 to 9Hz –
Under intermittent
vibration 2
9 to 150Hz 9.8m/s
5 to 9Hz –
Under continuous
2
vibration 9 to 150Hz 4.9m/s
2
, 3 times in each of X, Y and Z directions)
No corrosive gas
2000m or less
In control panel
or lower
2 or less
Self-cooling
or less). Connect to panel if unable to ground.
Specification
GT1685M-STBA
GT1685M-STBD
12.1"
SVGA: 800 600 [dots]
246(W) 184.5(H)[mm]
16-dot standard font: 50 chars. 37 lines (2-byte)
12-dot standard font: 66 chars. 50 lines (2-byte)
65536 colors
Right/left: 80 , Up: 60 , Down: 80
2 ] 470 [cd/m 2 ]
8-step adjustment
Approx. 52,000 hours
Approx. 50,000 hours or more
Analog resistive type
Min. 2 2 [dots] (per key)
4
(1 point only)
1 [m]
Right/left/up/down: 70
0 to 4 [sec]
15MB built-in flash memory
100,000 times
GT15-BAT type lithium battery
RS-232, 1ch
RS-422/485, 1ch
Connector shape: TYPE-A
Connecter shape: TYPE Mini-B
6
In panel: IP2X
316(W) 242(H) 52(D)[mm]
302(W) 228(H)[mm]
2.7[kg]
*1 : The maximum operating ambient temperature should be 5 C lower than
that shown in the table on the left when connecting to a multimedia unit
(GT16M-MMR), MELSECNET/H communication unit (GT15-J71LP23-25
or GT15-J71BR13), or CC-Link communication unit (GT15-J61BT13).
*2 : Do not operate or store the GOT unit in pressurized environments where
the pressure exceeds the 0m elevation atmospheric pressure, as this
could result in abnormal operation.
*3 : Assuming that the device is connected at some point between a public
Half amplitude Sweep count
power distribution network and local system equipment. Category
3.5mm applies to devices that are supplied with power from fixed equipment.
10 times in
The surge withstand voltage is 2500V for devices with ratings up to 300V.
–
each of X,
*4 : Index that indicates the level of foreign conductive matter in the operating
Y and Z
1.75mm
environment of device. Contamination level 2 denotes contamination by
directions
–
non-conductive matter only, though momentary conductivity may occur
due to occasional condensation.
Do not use or store the GOT under direct sun light or in an
environment with excessively high temperature, dust, humidity or
vibration.
Power supply specifications
Item
GT1695M-XTBA GT1685M-STBA
Input power supply voltage 100 to 240VAC (+10%, -15%)
Input frequency
50/60Hz ±5%
Input maximum 150VA
apparent power (at max. load)
Power consumption 64W or less
With backlight off 38W or less
26A or less
Inrush current
(4ms, at max. load)
Permissible instantaneous
Within 20ms (100VAC or more)
failure time
Noise voltage 1500Vp-p, noise width 1µs
Noise resistance
by noise simulator with noise frequency 25 to 60Hz
1500VAC for 1 minute between
Withstand voltage
power supply terminal and ground
10M or higher with an insulation resistance tester
Insulation resistance
(500VDC between power supply terminal and ground)
Applicable wire size
Clamp terminal Clamp terminals for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A
Tightening torque (terminal
block's terminal screws)
*1 : On LCD screens, bright dots (permanently lit) and black dots (not to be lit) generally appear. Because the large
number of display elements exist on an LCD screen, it is not possible to reduce appearance of the bright and
black dots to zero.
Flickering may occur depending on the display colors.
Note that the existence of bright and black dots is a standard characteristic of LCD screens, and it does not
mean that the products are defective or damaged.
*2 : LC panels have characteristics of tone reversal. Note that even within the indicated view angles, the screen
display may not be clear enough depending on the display color.
*3 : Using the GOT screen save/backlight OFF functions prevents screen burn-in and extends the backlight life.
*4 : An analog resistive touch display is used. When 2 points on the screen are touched simultaneously, if a switch
is located the middle of the 2 points then the switch will be activated. Therefore, avoid touching 2 points on the
screen simultaneously.
*5 : The memory is a ROM that permits overwriting of new data without having to delete the existing data.
*6 : With the USB environmentally protective cover is on, pressing firmly the portion marked "
to IP67f (JEM1030). (The USB interface conforms to IP2X (JEM1030) when a USB cable or a USB memory is
connected.) However, this does not guarantee protection in all users' environments.
The unit may not be used in an environment where it is exposed to splashing oil or chemicals for a long time or
it is soaked with full of oil mist.
Specification
GT1695M-XTBD GT1685M-STBD
24VDC (+25%, -20%)
–
110VA
–
(at max. load)
46W or less 60W or less 40W or less
32W or less 30W or less 26W or less
12A or less 11A or less
(75ms, at max. load) (40ms, at max. load)
Within 10ms
Noise voltage 500Vp-p, noise width 1µs
by noise simulator with noise frequency 25 to 60Hz
500VDC for 1 minute between
power supply terminal and ground
2
0.75 to 2 [mm ]
0.5 to 0.8 [N·m]
" makes it conform
1.2 Specification
1
2
3
4
5
6
7
9