4.7.7 Remote personal computer operation connection
System configuration
1) Displaying video image on GOT
Target device
RS-232
Personal
computer
Analog RGB
Precautions
Other precautions
Personal computer side setting
Before using the remote personal computer operation function, install the remote personal computer
operation driver on the personal computer.
After the driver installation, check that the driver is correctly installed.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of remote
personal computer operation connection
*
For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
cable
GT01-C30R2-9S(3m)
*1
Created by the user
GT15-C VG
50:5m
*1: The cable length differs depending on the specification of the personal computer to be used.
Use the cable that is compatible with the personal computer to be used.
*2: Only GT1585V and GT1575V are available.
4.7.7 Remote personal computer operation connection
Option unit
Not required
Built in GOT
Video/RGB
input
GT16M-R2
GT16M-V4R1
Video/RGB
input
GT15V-75R1
GT15V-75V4R1
Chapter 47 in GOT1000 Series Connection Manual
(SH-080532ENG)
4.7 Other Devices
GOT
*2
GT16/GT15
GT16
*2
GT15
251
1
2
3
4
5
6
7