4.6.2 OMRON temperature controller
For details of the system configuration, refer to "Connection type" in section 4.6.1.
Connectable GOT
Connectable models
Model
E5AN
E5EN
THERMAC NEO
E5CN
E5GN
INPANEL NEO
E5ZN
*1
When the RS-485 interface of the temperature controller is used, use the RS-232/RS-485 converter.
The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11
Bus connection
Handy GOT
RS-232 or RS-422 connections
Precautions
Precautions on system
When connecting a GOT to the OMRON temperature controller, set a terminating resistor for the
temperature controller.
For the GOT, set a terminating resistor with the DIP switches of the RS-422/485 serial communication
unit.
Clock setting of GOT
The temperature controller does not have the clock function. Even though [Adjust] or [Broadcast] is set for
the clock setting, the setting is invalid (not processed).
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of OMRON
temperature controller connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
*
For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
GT16/GT15
RS-485
RS-422
(2-wire
type)
(2-wire
type)
(2-wire
type)
(2-wire
type)
(2-wire
type)
Connection type
GT115
GT115
GT115
RS-232
RS-485
*1
*1
*1
*1
*1
GOT model to be used
-Q
BD
-Q
BDQ, GT115
-Q
BDA
HS-Q
BD
Chapter 30 in GOT1000 Series Connection Manual
(SH-080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 28 in Handy GOT User's Manual
(JY997D20101)
4.6 Temperature Controller
4.6.2 OMRON temperature controller
GT11
RS-422
RS-232
*1
*1
*1
*1
*1
229
1
2
3
4
5
6
7