Modbus(R)/Tcp Connection - Mitsubishi Electric GOT1000 Series Handbook

4.5 MODBUS(R)/TCP connection

System configuration
Target device
SCHNEIDER
programmable
controller
Modicon Premium
series
Modicon Quantum
series
*1
Ethernet module
YOKOGAWA
programmable
controller
STARDOM
*2*3
222

4.5 MODBUS(R)/TCP connection

cable
Ethernet
10BASE-T cable
*4*5
100BASE-TX cable
+
*5
Hub
+
Ethernet
10BASE-T cable
*4*5
100BASE-TX cable
*1: Connect the GOT to the Ethernet module via a hub.
*2: When connecting a GOT to a programmable controller, connect to the programmable controller Ethernet port via a hub.
*3: When connecting STARDOM of the YOKOGAWA programmable controller via MODBUS /TCP connection, Modbus Communication
Portfolio License is required. For details, refer to the YOKOGAWA programmable controller manual.
*4: For the twisted pair cable, use the straight cable.
*5: Use cables, connectors, and hubs that are compliant with the IEEE802.3 10BASE-T/100BASE-TX standard.
*6: When connecting GT16 to an equipment that meets the 10BASE (-T/2/5) standard, use the switching hub and operate in an environment
where 10Mbps and 100Mbps can be mixed.
*7: Up to 126 GOTs can be connected to STARDOM of the YOKOGAWA programmable controller.
Communication unit
Not required
Built in GOT
Ethernet
GT15-J71E71-100
R
GOT
*6
Max. number of
GT16
GOTs connected
*7
64 or 126
(16 units or less
are recommended.)
Max. connection
distance
100m
GT15