Step by Step
r
*90=Control Relay On?
r
#90=Control Relay Off?
*OQ
#OQ
1
Controlling Relays (not in HiPath 2000)
If this function has been configured (contact your ser-
vice personnel), you can turn up to four relays on and off
to control different facilities (such as a door opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and let
them switch off automatically after a timeout.
OK
Select and confirm.
or
OK
or
Enter the code for "Control Relay On" .
or
Enter the code for "Control Relay Off".
4
...
Enter the relay.
Sensors (HiPath 3300/3350/3500/3550
Only)
If this function has been configured (contact your ser-
vice personnel), sensors will detect signals causing
your phone to ring and a message to appear on your
screen.
Radio Paging (Not for U.S.)
If paging equipment is connected to your system (con-
tact your service personnel), you can contact people via
their pocket receivers.
The pocket receiver informs the owner that someone is
trying to get in touch. The person you page can then go
to the nearest telephone and call you.
Operating procedures differ according to the type of ra-
dio paging equipment connected (simple or enhanced
paging equipment).
Additional Features/Services
101