If You Cannot Reach A Destination; Call Waiting (Camp-On); Override - Joining An Ongoing Call - Siemens HiPath 2000 Operating Manual

Making Calls – Enhanced Functions
Step by Step
Camp-on
r
Override?
*L2
68

If You Cannot Reach a Destination

Call Waiting (Camp-On)

Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. five seconds) until "Camp-on" appears on
the display and the busy tone is followed by the ring
tone.
The called party can then respond
The called party can prevent automatic camp-on
Page 60.
If this feature is configured (contact your service
personnel), you immediately hear the ring tone
and the message "Camp-on" is displayed.

Override - Joining an Ongoing Call

This function is only available if it has been configured
(contact your service personnel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
OK
Select and confirm.
or
Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Preempt: (station
number or name)".
You can now start talking.
Page 59.