Answering Calls From The Entrance Telephone And Opening The Door - Siemens HiPath 2000 Operating Manual

Making Calls – Enhanced Functions
Step by Step
Open door?
Program/Service
r
*
61=Open door?
*L1
44
Answering Calls from the Entrance
Telephone and Opening the Door
If an entrance telephone has been programmed, you
can use your handset to speak to someone at the en-
trance telephone and activate a door opener.
If you have the proper authorization (contact your ser-
vice personnel), you can activate the door opener, en-
abling visitors to open the door themselves by entering
a five-digit code (for example, using a DTMF transmitter
or installed keypad).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
c
Press the talk key within 30 seconds. You are connect-
ed to the entrance telephone immediately.
or
c
Press the talk key after more than thirty seconds.
~
Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
OK
Confirm.
Opening the door from your telephone without
calling the entrance telephone:
FCN
Press the display key.
OK
Confirm.
OK
Select and confirm.
or
Enter the code.
~
Dial the entrance telephone number.
Opening the door with a code (at the door):
~
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.