Step by Step
*90=Control Relay On?
#90=Control Relay Off?
1
Controlling relays
(only for HiPath 3000)
If this function has been configured (contact your ser-
vice personnel), you can use up to four relays to enable/
disable different devices (such as a door opener).
Depending on how you program the relays, you can ac-
tivate and deactivate them manually them or configure
them to activate and deactivate automatically (after tim-
eout).
Special features must be taken into consideration
if your telephone operates with HiPath 5000 (sys-
tem networking via PC network)
Select and confirm the option shown
or
select and confirm the option shown.
4
...
Enter the relay.
Sensors (HiPath 33x0/35x0 only)
If configured (contact your service personnel), sensors
are able to recognize signals, call your phone, and dis-
play an appropriate message on the screen.
More functions/services
page 94!
83