Communicating With Pc Applications Over A Csta Interface - Siemens HiPath 2000 Operating Manual

Additional Features/Services
Step by Step
*4O4
q
Data I/O Service
Q
SC,
Data I/O Service
q
Data I/O Service
r
100
Communicating with PC Applications
over a CSTA Interface
If this function has been configured (ask your service
personnel), you can use your telephone to communica-
te with PC applications (CSTA = Computer Supported
Telecommunications Applications). You send informati-
on to the application and receive information from the
application, for example, on your telephone's display.
Enter the code.
or
FCN
Press the display key.
OK
Select "Data I/O Service". (Storing a Function in the FCN
List
~
Enter the three-digit ID for the application you want to
operate.
O p
... , Use the relevant keys to communicate with the applica-
tion.
Temporarily interrupting communication with the
application
c
The handset is ringing. You accept the call.
LED icon is flashing: communication with the applicati-
on was automatically interrupted.
Resuming communication with the application
FCN
Press the display key.
OK
LED icon is flashing. Select and confirm "Data I/O Ser-
vice". LED icon is red.
Ending communication with the application
OK
Select and confirm the appropriate CSTA message.
or
ca
Lift and replace the handset.
Page 70).