Placing External Calls On Hold - Siemens HiPath 2000 Operating Manual

Making Calls – Enhanced Functions
Step by Step
q
Hold
Held on line: 801
Program/Service
r
*
63=Retrieve line?
*LI
62

Placing External Calls on Hold

If you have programmed an FCN entry on your tele-
phone for "Hold"
calls on hold.
This enables all other parties to retrieve the call on the
assigned line.
FCN
Press the display key.
OK
Select and confirm, the LED icon is red.
A message appears showing which line is on hold
(e.g. 801); make a note of the line number.
The LED associated with the FCN entry (if available)
flashes slowly.
If applicable
a
Press the on-hook key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.
Picking up (retrieving) a held call
Precondition: One or more calls have been parked. The
telephone is idle.
FCN
Press the display key.
OK
Confirm.
OK
Select and confirm.
or
Enter the code.
Page 70, you can place external