Displaying And Assigning Call Charges; Displaying Call Charges (Not For U.s.) - Siemens HiPath 2000 Operating Manual

Displaying and Assigning Call Charges

Step by Step
Program/Service
r
*
65=Show call charges?
*L5
80
Displaying and Assigning Call
Charges

Displaying Call Charges (Not for U.S.)

For the current call:
The display usually shows call charges at the end of a
call (default setting).
If you wish to display charges while a call is in progress,
service personnel must request this feature from your
carrier.
Call charge display has to be requested from the service
provider and installed by an authorized technician.
The call charges are displayed will show the cost either
during or after the call, depending on the setting.
Some carriers also let you display toll-free external calls.
The message "Free of Charge" appears on the screen ei-
ther before or during the call.
If the call charge display function has not been installed,
the display will show the dialed number and/or the call
duration.
When a call is transferred, all charges are for-
warded to the telephone to which the call was
transferred.
For all calls and the last one conducted:
The connection charges for the last toll call conducted
are displayed first. The total accumulated connection
charges appear five seconds later.
FCN
Press the display key.
OK
Confirm.
OK
Select and confirm.
or
Enter the code.