Port Statistics Menu - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Table 44
Statistics Menu options
Command
sfd <clear>
clrmp
dump

Port Statistics Menu

Command: /stats/port <port number>
[Port Statistics Menu]
This menu displays traffic statistics on a port-by-port basis.
The following table describes the Port Statistics Menu options:
Table 45
Port Statistics Menu options
Command
8021x
brg
ether
if
ip
link
rmon
clear
Usage
Displays Server Link Failure Detection (SFD) statistics.
Add the argument, clear, to clear SFD statistics.
Clears all Management Processor statistics.
Dumps all switch statistics. Use this command to gather data for tuning and
debugging switch performance. If you want to capture dump data to a file, set
your communication software on your workstation to capture session data prior to
issuing the dump command.
8021x - Show 802.1x stats
brg - Show bridging ("dot1") stats
ether - Show Ethernet ("dot3") stats
if - Show interface ("if") stats
ip - Show Internet Protocol ("IP") stats
link - Show link stats
rmon - Show RMON stats
clear - Clear all port stats
Usage
Displays IEEE 802.1X statistics
Displays bridging ("dot1") statistics for the port.
Displays Ethernet ("dot3") statistics for the port.
Displays interface statistics for the port.
Displays Internet Protocol statistics for the port.
Displays link statistics for the port.
Displays Remote Monitoring (RMON) statistics for the port.
Clears all the statistics on the port.
Statistics Menu 73