Vrrp Tracking Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Hewlett-packard switch user manual
Table of Contents

Advertisement

Table 166
VRRP Interface Configuration Menu options
Command
cur

VRRP Tracking configuration

Command: /cfg/l3/vrrp/track
[VRRP Tracking Menu]
This menu is used for setting weights for the various criteria used to modify priority levels during the
master router election process. Each time one of the tracking criteria is met, the priority level for the
virtual router is increased by an amount defined through this menu.
NOTE:
These priority tracking options only define increment values. These options do not affect the
VRRP master router election process until options under the VRRP Virtual Router Priority Tracking
Menu are enabled.
The following table describes the VRRP Tracking Configuration Menu options.
Table 167
VRRP Tracking Configuration Menu options
Command
vrs <0-254>
ifs <0-254>
ports <0-254>
cur
Description
Displays the current configuration for this IP interface's authentication parameters.
vrs
- Set priority increment for virtual router tracking
ifs
- Set priority increment for IP interface tracking
ports
- Set priority increment for VLAN switch port tracking
cur
- Display current VRRP Priority Tracking configuration
Description
Defines the priority increment value (0 through 254) for virtual routers in master mode
detected on this switch. The default value is 2.
Defines the priority increment value (0 through 254) for active IP interfaces detected on
this switch. The default value is 2.
Defines the priority increment value (0 through 254) for active ports on the virtual
router's VLAN. The default value is 2.
Displays the current configuration of priority tracking increment values.
Configuration Menu 189

Advertisement

Table of Contents
loading

This manual is also suitable for:

10gb ethernet bl-c

Table of Contents