Yamaha DME64N Owner's Manual page 41

MIDI Setup button
NOTE
A maximum of 32 ports can be set.
NOTE
Slave DME64N/DME24N units connected via Ethernet and ICP1 units cannot be set.
NOTE
Only USB 1 is available on DME8i-C/DME8o-C/DME4io-C.
5
Making MIDI Port Settings in DME Designer.
The port for each device group master can be selected via the "Port" dialog box. If the driver is set
up already, check the settings before going online.
"Port" dialog box (page
6
Storing and Checking Scenes.
When moving online, the lowest scene must be stored. You can check if a scene is stored using the
"Scene Manager" dialog box.
NOTE
Since the SP2060 has scene preset data this confirmation is not necessary.
See "IP Address Setup" on
7
Recalling Scenes.
When going online, the scene will be recalled. Its scene number must be displayed in [Scene
Number], and its scene name will be displayed in Scene Name. If [--------] is displayed of [Scene
Name], the scene will be recalled.
NOTE
Since the SP2060 has scene preset data this confirmation is not necessary.
NOTE
When the scene device group display mode is "ALL" the scene link name will be displayed. Select a DME group to display
the DME group scene name.
Main Panel Window
See "Scene Manager" on
135)
page 145.
"Current Scene" (page 48)
page 70.
Chapter 2 DME Designer Overview
DME Designer Owner's Manual 41