Yamaha DME64N Owner's Manual page 404

Chapter 6 Component Guide
Output Master
If you click the [Output Master] button in the delay matrix component editor, it will open the [Delay
Matrix - OutputMaster] editor window. Here you can turn the master output for each channel ON
and OFF and set the level.
1
2
3
4
5
6
7
404 DME Designer Owner's Manual
[Delay Matrix - OutputMaster] editor window
1
2
3
Section Parameter
Output Meter
Level
On
Block On
Off
Nominal
Minimum
Setting Range
-- Displays the output signal level for each channel.
- to +10 dB Sets the output signal level for each channel.
ON/OFF Turns ON each channel's output.
-- Turns ON output for all channels in the Output
Master window. When turned ON, the [On] button
lights up.
-- Turns OFF output for all channels in the Output
Master window.
-- Resets all output signal levels in the Output Master
window, making them 0 dB.
-- Resets all output signal levels in the Output Master
window, making them - dB.
4
5
6
7
Function